2
Operating Instructions
HDMI to SCART Converter
Item no: 2357537
1 Intended use
The product is an HDMI to SCART converter that converts digital HDMI video and audio signals to ana-
logue (CVBS) composite video and FL/FR stereo audio signals.
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to
third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
2 Delivery contents
■
Product
■
Power adapter
■
Operating instructions
3 Latest product information
Download the latest product information at
www.conrad.com/downloads
or scan the QR code shown. Fol-
low the instructions on the website.
4 Description of symbols
The symbol with the exclamation mark in the triangle is used to indicate important informa-
tion in this document. Always read this information carefully.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety informa-
tion. If you do not follow the safety instructions and information on proper handling,
we assume no liability for any resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous playing mater-
ial for children.
■
If you have questions which remain unanswered by this information product, contact our technical
support service or other technical personnel.
5.2 Handling
■
If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. Safe operation can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
■
Consult an expert when in doubt about the operation, safety or connection of the appliance.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
5.4 Power adapter
■
Connect the appliance to a wall socket that can be accessed easily.
■
As power supply, only use the supplied mains adaptor.
■
Only connect the power adaptor to a normal mains socket connected to the public supply. Before
plugging in the power adaptor, check whether the voltage stated on the power adaptor complies with
the voltage of your electricity supplier.
■
Never connect or disconnect power adaptors if your hands are wet.
■
Never unplug the power adaptor from the mains socket by pulling on the cable; always use the grips
on the plug.
■
For safety reasons, disconnect the power adaptor from the mains socket during storms.
■
Do not touch the power adapter if there are any signs of damage, as this may cause a fatal electric
shock! Take the following steps:
– Switch off the mains voltage to the socket containing the power adapter (switch off the correspond-
ing circuit breaker or remove the safety fuse, and then switch off the corresponding RCD protective
switch).
– Unplug the power adapter from the mains socket.
– Use a new power adapter of the same design. Do not use the damaged adapter again.
6 Product overview
P
A
L
/N
T
S
C
1
2
3
4
5
1
Switch: PAL/NTSC
2
Input: HDMI
3
LED Power indicator
4
Input: DC/5V
5
Output: SCART
7 Connection.
P
RECONDITIONS
:
a
You have suitable cables for connection.
1. Slide the
NTSC/PAL
switch to select the correct video standard.
2. Connect an HDMI source to the
HDMI
input.
3. Connect a SCART display to the
SCART
output.
4. Connect one end of the power adapter to the
DC/5V
input on the product. Connect the other end to a
suitable power source.
à
The
Power
LED lights up to indicate the product is receiving power.
8 Cleaning and care
1. Disconnect the product from the power supply.
2. Clean the product with a dry, fibre-free cloth.
NOTICE! Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
9 Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
10 Technical data
a) General
Input voltage/current ............................... 5 V/DC, 1A
Working current ...................................... max. 600 mA
HDMI input.............................................. Resolution: max. 1920 x 1080p 60 Hz
Bandwidth: max. 300 MHz
Baud rate: max. 10.2 Gbps
Deep colour: 24-bit, 30-bit, 36 bit
Cable length: max. 7 m
SCART output......................................... Resolution: 480i, 576i
Cable length: max. 8 m
Video standards...................................... NTSC, PAL
DVI sideline signal support ..................... yes
Operating conditions............................... -10 to +55 °C, 10 – 90 % RH (non-condensing)
Storage conditions .................................. -20 to +60 °C, 5 – 95 % RH (non-condensing)
Dimensions (W x H x D).......................... 88.5 x 58 x 25 mm
Weight..................................................... 50 g
b) Power adapter
Input........................................................ 100 – 240 V/AC 50/60Hz
Output ..................................................... 5 V/DC 1A
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE
*2357537_V1_0521_dh_mh_en
