Receiver
1
HDBase T Out
socket
2
RS232
socket
3
LAN
socket
4
LAN
socket
5
HDMI Out
socket
6 Power connector
Power 48V
7 Interruptors of
RS232 MODE
and
CTRL / UPDATE
8 LED
Power
9 LED
Link
10 LED
Status
11
IR In
socket
12
IR Out
socket
Setup
a) HDMI connection
Example of a connection diagram
HDMI In
HDMI Out
RS232
CAT6a
HD TV
Transmitter
Receiver
• Turn off all devices and disconnect them from the power supply before connecting each
component.
• It is supplied with rubber feet. If necessary, you can attach these to the bottom of the
receiver. Note that rubber feet can leave marks on sensitive surfaces. If necessary, place a
suitable base on the surface.
• Follow the instructions provided for your transmitter.
• Connect the output of the HDBaseT transmitter and the
HDBase T In
socket
(1)
to a CAT6a
network cable (RJ45). Observe the technical data to determine the length of the network
cable needed.
• On the
RS232
socket
(2)
, you can connect a PC or notebook that issues
commands via RS232 (such as turning on/off a compatible projector or
monitor). The delivery includes a RS232 Phoenix plug. Observe the
illustration opposite with the correct connections.
• Connect an HDTV / Monitor and the
HDMI OUT
socket
(17)
to the receiver with a suitable
HDMI cable.
• Connect the tab of the power adapter to the power connector
Power 48V
(6)
and the mains
plug with a suitable mains socket. If an upstream transmitter already supplies enough
power via the network cable, it is not necessary to connect the power supply.
b) Brief description of the controls
Control
Function
LAN
socket
Connect Ethernet devices such as a router or computer. It also
serves as an Ethernet switch. The signals work bidirectionally.
HDMI Out
socket
Connect HD TV/Monitor.
Power connector
Power 48V
Connection for the power adapter.
Interruptors of
RS232 MODE
and
CTRL / UPDATE
Switch for RS232 mode and Internet update of the internal
manufacturer software.
LED
Power
It indicates that the product is receiving power.
LED
Link
It indicates that the product detected an HDBaseT connection
(input and output).
LED
Status
It indicates that the product is connected to an HDMI device.
IR In
socket:
Connection for the IR receiver.
IR Out
socket:
Connection for the IR transmitter (send).
Care and cleaning
• Disconnect the product from the mains before each cleaning.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these
may damage the case or cause the product to malfunction.
• Use a dry, lint-free cloth to clean the product.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accordance
with applicable regulatory guidelines.
You thus fulfil your statutory obligations and contribute to environmental protection.
Technical data
a) Receiver (RX)
Output voltage/current ...............48 V/DC 0.5 A
Bandwidth ..................................up to 18 Gbps
HDMI port ..................................Transmitter HDMI input, receiver HDMI output
Video resolution .........................1080p (network cable CAT6a with max. length of 100 m)
4K 60 Hz 4:4:4 (network cable CAT6a with max. length of 70 m)
Compatibility ..............................HDCP 2.2, HDR
PoE output power ......................Bidirectional, RX to TX: max. 10.6 W
RS232 ........................................Bidirectional
IR-transmitter/receiver ...............Bidirectional
Ethernet Interface ......................100 Mbps
Operating temperature ..............0 to +55 ºC
Storage temperature ..................
-10˚C to +70˚C
Operating/storage humidity .......5 - 90% relative humidity
Dimensions (L x W x H) .............143 x 98 x 13 mm
Weight .......................................approx. 290 g
b) Power adapter
Input voltage/current ..................100 - 240 V/AC 0.5 A
Output voltage / current .............48 V/DC 0.5 A
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in
electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication reflects the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE. *1911201_v1_0819_02_hk_m_en(2)
