SPE MS230-1, Руководство по эксплуатации, Страница: 6 / 15

3
MS230-1
MULTISRIPPER
Operating Manual
SAFETY
1) Only trained operatives should be allowed to work the MS230
2) Appropriate PPE must be worn.
3) Keep hands and feet away from the moving blade at all times
4) Keep the electric lead away from the moving blade
5) Never leave the MS230 unattended whilst in use. Always stop the motor before
leaving the machine.
6) Always ensure that all power leads are disconnected before attempting to
service the machine. Never tip the machine backwards until the blade has stopped moving.
7) Do not use in wet conditions
8) Always use the correct voltage for the machine and RCD protection
9) Be careful when working around pipes or ducts protruding from the floor as the moving
blade may cause damage to them
10) Extreme care should be taken when changing the blades. The blades are sharp and
suitable protection should be used when handling them.
11) Equipment must be used in line with guidelines laid down by the Health & Safety
Executive.
Noise and vibration will occur at various levels dependent on the attachments and work being
completed. SPE have assessments conducted under test conditions detailed in the operating
manual, see page 10. However, it is recommended that additional tests are taken on site to
provide the operator with accurate information on using the equipment within the guidelines
laid down by the Health and Safety Executive.