DFG400-5 & 5DP
COMPACT FLOOR GRINDER
Operating Manual
DFG400
COMPACT FLOOR GRINDER
This manual covers to the best of our knowledge the operation and maintenance to the
DFG400 floor grinder. Before operation of the equipment the manual should be read and
understood by the operator. The safety regulations must be followed at all times. Service
of electrical components should be carried out by authorised personnel. Failure to follow
these instructions could result in damage to the machine and/or serious personal injury or
death.
Warning
Failure to follow these instructions may result in serious personal injury or death. SPE
disclaims all responsibility for damage to persons or objects arising as a consequence of
incorrect handling of the machine and failure to inspect the machine for damage or other
faults that may influence the operation prior to starting work.
DFG400-5 & DFG400-5DP
The difference between the two variations of machine is as follows:
DFG400-5 This is supplied as standard, fitted with 2no drive plates (part no 6435L (L/H)
and 6435R (R/H)) for use with carborundum grinding blocks, etc with the wedge retaining
system.
DFG400-5DP This is supplied as standard fitted with 2no adaptor plates (part no 5064A) which
will allow the use of diamond grinding plates, etc
