SPE AM-01/6, Руководство пользователя, Страница: 7 / 14

USER MANUAL AM-01/6
INDICE Pag. 7 di 14
In case of no SO2R operation, even without removing the SO2R / SO2R coaxial cable,
press [SET] then set “REMOTE ANT SWITCH” in the Config menu.
In both cases the antenna settings remain those previously established in the Antenna
menu, as an example:
The examples refer to the BANK A, each setting is of course also possible with the
BANK B.
Attention: The Matrix was designed for 6 antennas because 6 are contest HF bands.
This guarantees the passage between band and band with maximum speed.
If multi-band antennas are used, WARC and 6m bands can also be set.
For the 6 m band, where a preamplifier and a probable sequencer are often used, since
a rapid passage with the HF bands is not required, it is advisable, but not mandatory, to
have a separate cable and not to pass through the Matrix.
In this case when it is necessary to operate in 50 MHz, returning to the
conventional setting, the same ANT output is maintained.