USER MANUAL
AM-01/6
Pag. 11 di 14
The AMB-02 Control box is powered by an external source of 13.8 VDC nominal (15.5
VDC max), you can use the supplied cable connected to the transceiver Power Supply.
At the top of the panel there is the "Ready" LED with the following meanings:
•
Green LED means correct presence of 13.8 VDC.
•
Red LED means anomalous absorption of 13.8 VDC.
The PORT connector must be connected via the supplied cable to the corresponding
PORT of the Expert amplifier or to the PORT OUT of the Combiner.
If a longer cable is required, build a new one according to the following diagram.
Note: with this cable, in the case of the Expert amplifier off, the Matrix automatically
activates the ANT1 in accordance with the Expert manual.
PORT Connector
Note: IC 1 and IC2 must be connected only as described in the supplied cable or in the
cable in case of manual control.
