SPC 3604N, Руководство пользователя, Страница: 8 / 11

8
up its handset or press key to perform in-house conversation (this function just for your
selection).
2. Please use same series phones to transfer as above operation. Any special services starting
with “
*
” offered by your Telephone company may not function properly. To get the best effect of
this function, you should load the batteries before using.
MUTE FUNCTION
When making a phone call, if you need a temporal talk with someone else and you don’t want the
phone receiver hear your speaking, press key to mute your voice sending, and LCD displays
MUTE. Press key again to return to conversation mode.
ANTI-DIALING FROM PARALLEL PHONES FUNCTION
1. In on-hook state, press and hold #/= key 3 seconds, LCD displays SPI ON
2. Press key twice, then press and hold #/= key again, LCD displays SPI OFF
After set anti-dialing mode at ON state, when one wants to dial a number from the extension, the
extension is given “di-di, di-di” beep continuously and not allowed to make a call.
SETTING DIALING MODE
1. In on-hook state, press and hold
*
/. key for 3 seconds, LCD displays P , then dialing mode is
set as Pulse.
2. Press key twice and hold
*
/. key for 3 seconds again, LCD displays T , then dialing mode
is set as Tone.
NOTE: The default mode is TONE.
SETTING RINGING TONE
There are 5 kinds of normal ringing tone, 4 kinds of chord music and ringing OFF for selection:
1. In on-hook state, press TIMBRE key, LCD displays ring 01 db5
2. Press TIMBRE key to select the desired ringer,
3. Press VOL/+ or VOL/– key to adjust the ringing volume
4. Press MENU key to confirm and quit.
NOTE: The volume ranges from 1db-5db, with 5db being the loudest. Ring OFF is “Do Not
Disturb” mode. If the phone is set to this mode, the telephone will not ring when there is an
incoming call.
ADJUST HANDSFREE VOLUME
In hands-free state, Press VOL/+ or VOL/– key to adjust the handsfree volume, LCD displays the
volume level, total 4 steps.
SETTING PABX CODE
1. In on-hook state, press and hold key 3 seconds to set PABX code, LCD displays