7
Adjusting LCD Contrast
1. In on-hook state, press
MENU
key, then press
/+
twice, LCD displays
SET 3 LCD
. Press
MENU
key, LCD displays
LCD 08
2. Press
/+
or
/–
key to adjust the contrast of LCD, total 16 levels can be selected.
3. Press
MENU
key to confirm and enter the next item setting.
Short-cut key: Alternatively in on-hook state, press BRILLO key to enter LCD contrast
setting directly, then press BRILLO key continuously to adjust the LCD contrast.
Setting flash time
1. In on-hook state, press
MENU
key, then press
/+
three times, LCD displays
SET 4 FLASH
.
Press
MENU
key, LCD display
FLASH 100
2. Press
/+
or
/–
key to set the flash time, flash time can be set at 1000ms, 600ms, 300ms or
100ms.
3. Press
MENU
key to confirm and quit.
Setting Alarm Clock
1. In on-hook state, press
key once, LCD displays
12-00 AL1
,
2. Press
/+
or
/–
key to select ON or OFF, when select ON, LCD displays “
ALM
” icon.
3. Press
MENU
key, “12” start to flash.
4. Press
/+
or
/–
key to set the alarm hour and press
MENU
key to confirm and enter alarm
minute setting.
5. Press
/+
or
/–
key to set the alarm minute and press
MENU
key to confirm and go to next
group alarm clock setting.
6. Press
MENU
key to confirm and go to next alarm clock setting.
7. Follow same steps to the other alarm clocks.
NOTE:
The first three alarm clocks are active in periodical and the last 2 are single time alarm
only.
TRANSFER BETWEEN PARALLEL PHONES
Setting paging number
1. In on-hook state, press and hold
MENU
key, LCD displays
EL--
2. Key in “
*
” and the paging number (example “
*1
”and ”
*2
” ), using
key to edit
3. Press
MENU
key to confirm and exit.
Transferring the line between paralleled phones
When a call comes, use one of paralleled phones to answer. Press “
*
” and the paging number
that was set in another telephone unit(the operation should be done within 30 seconds after
answering the call. otherwise, the transfer operation is not available), the unit rings, pick up its
handset or press
key to answer the incoming call.
NOTE:
1. On a parallel phone, pick up its handset or press its speaker key, then press ”
*
” and
the paging number that was set in another telephone unit within 30 seconds, the unit rings, pick
Содержание 3604N
Страница 3: ...3 LOCATION DISCRIPTION...