Trouble analysis and obviation
Phenomenon
Reason
Solution
The water
pump does
not operate
1. The air switch is not tight, and leak
pressure.
2.Air switch are ineffective.
3.The plug not be inserted or power
supply abnormally.
4.There are sundries
that blocks the water pump impeller.
5.The water level not reached the height
stipulated.
1.Insert the air pipe closely.
2.Adjust the air switch.
3.Insert the plug closely.
4.Remove sundries.
5 . Add water to the
suitable height.
Can't adjust
the massage
strength
1. Power supply is abnormal.
2. The strength adjusting does not act.
3.The large air pipe not been inserted
closely.
1.Insert the plug closely.
2.Adjust the strength
adjusting.
3.Insert the air pipe
closely.
The water
pipe leaks
1.Seal gasket is not good.
2.The nut not been locked tightly,
interface place sticking is bad.
3.The inner layer in the water pipe
breaks.
1.Change the seal ring.
2.Screw down the nut,
and seal the interface.
3.change the water tube.
The
submarine
light is not
bright
1.The fuse of the light is melted.
2. No water in the bathtub or the
water not high enough.
3.The light bulb has been out of order.
1.Change the fuse with
specification.
2.Add water to be higher
than the nozzle.
3.Change the light bulb.
18
