Spartherm ebios-fire architecture SL, Инструкция по установке и эксплуатации

Страница: 12 / 20

GB 12
9. Take the bottle to wet the burner. Insert the bottle with the opening
into the tank opening so that it projects into the fuel. Press the bottle
together so that the air escapes and the fuel is sucked up when it is
released. Wait until the bottle returns to its original shape.
10. Seal the filling plug securely using the key.
Proceed as follows:
1. Ensure that the air supply is sufficient.
2. Make sure that the burner has gone out and has cooled down fully
(minimum waiting time after being extinguished = 1 hour).
3. The burner remains in the housing when being refilled. For this remove
the protective panes and then open the housing cover.
4. Check the tank content.
5. Make sure that the cover plate is placed on the burner and covers the
burner mat.
6. Use a key to open the filling screw.
7. Insert the funnel into the filling opening and pour in a maximum of 2.6
l of bioethanol.
8. The fill level indicator shows the maximum permitted fill level.
The maximum fill level is reached when the bioethanol runs out of the
slit (see arrow) into the reflector curve.