23
Start-Up Guide
FITTING PROTECTIVE COLLAR
1 . Slip the collar over the camera head .
2 . Adjust it to the chosen position .
3 . Tighten the three grub screws both hand tight .
4 . Check the collar is secure .
Description
30mm TrapJumper Camera Head
TrapJumper Slip Skid
64051824
TrapJumper Skid 60mm OD
64051825
TrapJumper Skid 85mm OD
64051826
NOTE:
Ensure the grub screw threads remain clean of grit and other particles!
Spartan Tool, LLC continues to offer a wider range of protective sleeves and equipment for all the camera ranges .
Please check www .spartantool .com for new accessories .
Tighten
Loosen
