Spartan LIMP SAW, Руководство оператора

Страница: 16 / 17

TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Burn marks appear on the wood
that you are cutting, or soft, easy Dull chain Replace or sharpen your chain.
to cut wood is difficult to cut
Low hydraulic fluid level Check and refill hydraulic system to proper
Aeration of hydraulic fluid level.
(generally indicated by foamy
Refer to Power Unit's manual and replace
appearance of fluid). Hydraulic fluid foaming due to
improper hydraulic oil usage
hydraulic oil using recommended hydraulic
oil.
Dirty oil Drain and refill oil, replace filter.
Partially plugged inlet filter Clean filter element.
Hydraulic oil heating
Oil too light in hot weather Use recommended oil.
Damaged oil lines Replace oil lines.
Broken oil lines Replace hose and check for leaks.
External hydraulic fluid leakage Loose hydraulic connection Tighten loose connections.
Cold hydraulic fluid
Allow hydraulic fluid to warm up to
operating temperature.
Engine R.P.M. too slow Increase engine R.P.M.
Hydraulic pump capacity Low hydraulic fluid supply Refer to power unit's manual for service
inadequate recommendations.
Hydraulic hose restriction
Check for evidence of restriction in
hydraulic hoses.
- 14 -