manualshive.com logo in svg

Spartan Tool 740 Water Jet, Руководство пользователя

Поделиться
Скачать
Spartan Tool 740 Water Jet Скачать руководство пользователя страница 70

Spartan Tool L.L.C. reserves the right to make changes at any time, without notice, to specifications and
models and also discontinue models. The right is also reserved to change specifications or parts at any time
without incurring any obligation to equip same on models manufactured prior to the date of change.

SPARTAN TOOL L.L.C.

1506 W. Division Street

Mendota, IL  61342

 800.435.3866 

‹

 Fax 888.876.2371

www.spartantool.com

ONE YEAR WARRANTY

Spartan Tool warrants its equipment to free from defects in material and workmanship for one year from
the date of purchase.  To obtain warranty service, a purchaser should notify Spartan Tool in writing, at the
address provided below, within the warranty period, and Spartan Tool will direct where to take or send
the equipment for service.  If the defect is covered by the warranty, Spartan Tool will repair or replace, at
its option, the defective equipment, without charge for labor or materials.  (Freight and insurance are the
purchaser’s responsibility.)

This warranty is limited to the original retail purchaser and is not transferable.  Spartan Tool assumes no
responsibility for damage due to accident, neglect, abuse, tampering or misuse, nor damage from
repairs or alterations by others.  This warranty does not cover damage to the equipment resulting from
the use of replacement parts other than Spartan Tool parts.

Spartan Tool’s sole obligation and the original retail purchaser’s exclusive remedy under this warranty
shall be for repair or replacement as described above.  ALL OTHER WARRANTIES, WHETHER
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
EVENT SHALL SPARTAN TOOL BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES.

SPARTAN TOOL L.L.C.
MENDOTA, ILLINOIS  61342

Содержание 740 Water Jet







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды