STEP 7
Fix the locking knob (pt.31) to
the rower arm "H" Bracket
(pt.34) with a carriage bolt and
washer (Pt.32,10) and tighten.
The bolt should be fitted from
the inside of the rower facing
outwards. Repeat the above
with second rower arm and "H"
bracket making sure that the
"H" brackets are spaced at
similar distances along the
rower
arms
(check
them
against the numbers stamped
on the arms.)
STEP 8
Attach the free end of the
hydraulic cylinder (pt.25) to the
bottom of the "H" Bracket on
the rower arm using a carriage
bolt, a washer and a nylock nut
(pt.32, 10 and 14). The bolt
should be fitted from the inside
of the rower facing outwards.
Repeat the procedure with the
second
rower
arm
and
hydraulic cylinder.
STEP 9
Fix the large nut (pt.38) to the
pedal spindle bar (pt.36) and
slide a rubber washer (pt.37)
up to it. Then slide the bar
through the pedal (pt.39) and
fit a second rubber washer
(pt.37)
