Spartan Equipment SKID-PAC 1000, Техническое руководство

Страница: 35 / 48

Spartan Equipment Technical Manual Skid-Pac
TM
1000, 1000B
25
SECTION 12.0
LIFTING, TRANSPORT & STORAGE
WARNING
Crush hazard. Injury may
result if the Skid-Pac
shifts or falls. Do not lift
the Skid-Pac by the
mounting pins or whip
hose. The LIFT POINT
decal identifies the
recommended lifting
points. Lifting devices
must safely carry the
loads to which they will
be subjected. Lift away
from people. Do not
enter the danger zone
while the attachment is
being lifted.
CAUTION
Crush hazard. Keep hands
and feet clear of crush
points. Always use
sufficient blocking to avoid
accidental or sudden
movement of the
attachment.
12.1 Lifting & Transport
12.1.1 If the attachment is to be
transported independently of the
carrier;
1. Remove all loose debris from
attachment.
2. If the swivel assembly is installed, lock
swivel position with bolt.
3. Follow removal instructions in Section
8.3.
4. Secure hoses to unit to avoid accidental
damage.
5. Lift attachment only at approved lift
points. See diagram in Section 6.3.
6. Adequately stabilize and secure
attachment for transport.
12.1.2 If the Skid-Pac is transported
while installed on the carrier:
1. Remove all loose debris from
attachment.
2. If the swivel assembly is installed, lock
swivel position with bolt.
3. Secure hoses to unit to avoid accidental
damage.
4. Inspect the mounting pins and hardware
for damage and integrity.
5. Transport carrier in accordance with
carrier manufacture
r’s
recommendations.
12.2 Storage
Observe the following storage precautions.
Store in upright position
Avoid wet or damp conditions to
minimize rust
Seal hydraulic connections to protect
against contamination
Keep the motor full of oil to protect
internal components
Protect rubber components such as
spring mounts and hoses from exposure
to direct sunlight to reduce aging effects
Support the mounting frame with blocks
to minimize permanent sag in spring
mounts.