QUICK START
WWW.sparrl.com
6
vii)
You can set the IP Address to 192.168.0.xxx. For further configuration please
refer the Manual of EAD01-102.
viii) Remove the LAN cable and restart the unit.
ix)
Open the Hyper terminal with the settings as Connect using COM1,
Baud rate ”9600”, Data bits ’8’,Parity “None” and Flow control “None”.
x)
Connect the LAN cable after verifying the LED status (LEDs D2, D31 and an
LED in the RJ-45 connector (Yellow) should be ON).
xi)
Click Start, Run option on your desktop
xii)
Type “telnet IP Address<space>Port number”
(for e.g., telnet 192.168.0.xxx 7727).
xiii) Press the “enter” key.
xiv) Transfer the data from both sides.
II) EAD 01-102MB
In the case of EAD 01-102MB (Metal Box Unit) all the procedures are similar to that
of EAD 01-102B except in the case of giving power. For this EAD we are having a
power chord out of the unit, with that we can directly plug in to 230V AC.
