16
6. Configuring through Telnet Connection
To configure the unit over the Local Are Network, establish a Telnet connection to port
9999.
From the Windows Start menu, click
Run
and type the following command, where
x.x.x.x is the IP address and 9999 is the EAD 02’s fixed network configuration port
number.
telnet x.x.x.x 9999 (Example: telnet 192.168.100.123 9999)
Note: Be sure to include a space between the IP address and 9999.
2. Click
O
K.
3. The
EAD 02 Device Server
window displays.
*** Lantronix Universal Device Server ***
Serial Number 7401362 MAC address 00:20:4A:74:05:52
Software version 04.5 (010322)
Press Enter to go into Setup Mode
4. To enter the Setup Mode,
you must press Enter within 5 second
s.
The configuration settings will appear.
5. Select an option on the menu by entering the number of the option in the
Your choice
?field and pressing
Ente
r.
6. To enter a value for a parameter, type the value and press
Ente
r, or to confirm a
current value, just press
Ente
r.
7. When you are finished, save the new configurations (option 9). The unit will reboot.
7. Serial Line Interfaces
7.1. Connector Pinout RS-232C, Port 1
This connector is available on the EAD 02 External Models. Configuration is DCE
(modem-like), 25 pin female Sub D.
