13
Exampl
e:
The configured remote IP address within the EAD 02 is 129.1.2.3 and the TCP
port number is 1234 :
C121.2.4.5/1<CR>
complete override - connection is started with host
121.2.4.5, port 1.
C5<CR>
This means connect to 129.1.2.5, port 1234.
C28.10/12<CR>
This means connect to 129.1.28.10, port 12.
4.7.8. Disconnect Mode
In disconnect mode, DTR drop can be activated or ignored to end a connection:
- Disconnect with DTR drop: 80
- Ignore DTR: 00
4.7.9. Force Telnet Mode
With another bit in the disconnect mode, EAD 02 can be forced into Telnet (terminal)
mode and the setup for the terminal name can be enabled: - activate Telnet mode and
terminal type setup: 40
4.7.10. Buffer Flushing
With this parameter it is possible to control line handling and network buffers with
connection startup and disconnect. Also, selection between two different packing
algorithms is possible.
Function
7
6
5
4
3
2
1
0
Clear input buffer (line to network)
- with active connection:
1
- with passive connection
1
- at time of disconnect
1
Clear output buffer (network to line)
- with active connection
1
- with passive connection
1
- at time of disconnect
1
Alternate packing algorithm
Character on serial line
1
