Sparky Group SM 1212CE Скачать руководство пользователя страница 12

Страница: 12 / 82

SM 1212CE ● SMА 1212CE

13. Remove the pin spanner (26).

14. Mount the flexible pad (17) onto the sup

port disc (15). Ensure the coaxiality between the

openings of the support disc (15) and the flex

ible pad (17) for better dust extraction. Proper
dust extraction is a prerequisite for high quality
of the processed surface.

MOUNTING THE SANDPAPER

The machine is delivered assembled. All you
have to do is mount the selected sandpaper
and check if the tightening nut (16) is fastened

firmly.

1. Ensure that the power tool is unplugged.

2. Turn the machine in a way ensuring ac

cess to the operating tool. We recommend fixing

the machine in stationary position. Thus it would
be possible to use both hands for convenient
and safe assembly.

3. Fasten the tightening nut (16) firmly using

the pin spanner (26) supplied with the machine.

4. Mount the selected sandpaper disc trying

to ensure its coaxiality toward the flexible pad

and the support disc.
5. Ensure the coaxiality between the open-

ings of sandpaper and the flexible pad (17) for

better dust extraction. Proper dust extraction is
a prerequisite for high quality of the processed
surface.

6. Press the sandpaper (18) to the flexible

pad (17) to ensure maximum cohesion of the
hook-and-loop surfaces.
7. Turn the machine with the sandpaper fac-
ing downward.

8. Plug in the power tool.

9. Select position G of the electronic regula

tor (19). Slide the ON/OFF switch slider (5) for

ward to start the machine.
  10. Let the machine operate at no load for ap-
proximately one minute not allowing the operat-
ing tool to contact any surface.
  11. At  the  event  of  increased  vibrations  or
other  symptoms  not  typical  for  operation,  stop
the  machine  immediately  and  search  for  the
reason.  If  you  can  not  detect  the  reason  your-
self  -  contact  the  nearest  authorised  SPARKY
service centre. Operating with a faulty machine

may cause an accident!

12. If no trouble is detected then you can start

operation.

REPLACING THE SANDPAPER

1. Ensure that the power tool is unplugged.

2. Turn the machine in a way ensuring ac

cess to the operating tool. We recommend fixing

the machine in stationary position. Thus it would
be possible to use both hands for convenient
and safe assembly.

3. Remove the clogged sandpaper (18) by

tearing it from the flexible pad (17).

4. Follow steps 4 - 12 described in section

„Mounting the sandpaper”.

REMOVING THE ACCESSORIES fOR
SANDING WITH SANDPAPER

1. Ensure that the power tool is unplugged.

2. Turn the machine in a way ensuring ac

cess to the operating tool. We recommend fixing

the machine in stationary position. Thus it would
be possible to use both hands for convenient
and safe assembly.

3. Remove the sandpaper (18).

4. Remove the flexible pad (17) by tearing it

from the support disc (15).
5. Press the spindle lock button (3) and rotate
by hand the operating accessory clockwise until
the button sinks and locks the spindle. Remove
the tightening nut (16) using the pin spanner

(26). After removing the nut ensure that the lock

button (3) has returned in its initial position and

does not lock the spindle (8) movement. In case

the button (3) still locks the spindle (8) rotate the

spindle by hand until the lock button has been
released and returned in its initial position.
6. Remove the support disc (15) and the sup-

port flange (14).

SANDING WITH ABRASIVE NET

Operation with abrasive net is entirely analogi-
cal to operating with sandpaper.

Familiarise yourself with the corresponding

information for using sandpaper in the corre-
sponding sections and perform the described
procedures.

OPERATING WITH DIAMOND DISC

The choice of the diamond disc (21) depends on