Sparkrite SRA1, Руководство по установке

Страница: 9 / 11

9
REMOTE CONTROL TRANSMITTER
Pressing button on remote control dose not light the LED next to button.
Discharged or missing battery. Replace battery.
Poor battery connection. Adjust terminals to ensure good
battery contact.
BATTERY REPLACEMENT
The battery needs replacing if the operating range reduces to 1 meter or when
the indicator LED does not light when the transmitter button is pressed.
To replace the battery remove the screw from the rear of the casing and
carefully separate the transmitter moulding.
Replace with 12 volt Sparkrite battery Part No.SR904 observing correct
polarity
ARMING AND DISARMING
Pressing button on the remote control lights the transmitter indicator LED but
the alarm does not arm/disarm.
No power supply to unit
Distance between transmitter and
receiver is too great
NOTE : The transmitter operating range can vary due to changes in
atmospheric conditions.
Check wiring, fuse and using a
suitable tester, check that 12V is
present on the RED wire
Check the BLACK wire is securely
connected to the battery negative
terminal.
Move closer and try again