6. SERVICE AND MAINTENANCE
6.1 Calibration
To ensure the measurement accuracy Sparklike Laser
Portable 2.0 must be calibrated and maintenanced
annually.
To request calibration and/or maintenance, please
contact Sparklike Service Center
sparklike.com/en/care-and-maintenance/calibration
6.2 Technical support using remote
connection
Sparklike can offer remote technical support using
TeamViewer application. Connect your device to the In-
ternet using an Ethernet cable. The Ethernet connector
is located in the connector panel inside the trolley case.
Please contact Sparklike
to
open the remote connection for technical support.
6.3 Packing and shipping
Sparklike Laser Portable 2.0 is sensitive measuring
device and the device must be packed appropriately to
ensure safe shipping. Go to
sparklike.com/guidance/lp
to get instructions how to pack the device for transpor-
tation.
The window of the measurement head is sensitive to
scratches. If the window of the measurement head
requires cleaning, use materials and solvents made
for delicate optical instruments.
Ethernet connector location
in the connector panel
inside the trolley
The device pack on a pallet.
7. CONNECTIONS
The measuring head is connected with 4 signal cables
to the matching sockets on the main unit and with a
flushing hose to the flushing gas inlet connector. The
signal cables and matching sockets are distinguished
by the color and text-markings. The display is connected
with an HDMI connector, USB connector, and power
cord to the main unit. For connecting or disconnecting
the cables, refer to
sparklike.com/guidance/lp
.
Connector panel:
Connections
12
