Sparklike
Laser Portable
™
2.0
Sparklike technology since 2000
Your IG Quality Assurance
INSTRUCTION MANUAL
Table of Contents
1.
Sparklike Laser Specifications
2.
Starting up the Sparklike LASER
3.
Start using the equipment
4.
Taking a measurement
5.
Troubleshooting
6.
Service and maintenance
7.
Connections
8.
Technical specifications
Î
Do not position the equipment in a way that it would be
difficult to reach and operate the power cable.
Î
If the equipment is used in a manner not specified by the
manufacturer, the safety protection of the equipment
may be compromised.
Î
Do not replace detachable mains supply cords with
inadequately rated cords.
Î
Always make sure that you are using a safety grounded
socket with a safety grounded mains supply cord to
connect the mains supply.
Î
Never flush the device with a gas flow greater than 3 litres/
min (Chapter 3.2).
Î
To ensure the measurement accuracy device must be
calibrated annually.
Î
Unauthorized modification or replacement of components
is forbidden. This will void the warranty and may cause
danger to the user. For maintenance, refer to Sparklike Oy or
Sparklike Service Partners.
NOTIFICATIONS:
