1
Wireless Module
1. WNFB-266AXI(BT) & AP12275_M2 Evaluation
Board Introduction
The WNFB-266AXI(BT) & AP12275_M2 evaluation board (EVB) is shown in Figure 1.
This specifically provides customers as a test application for WNFB-266AXI(BT) &
AP12275_M2 products. It provides communication interface conversion, functional I/O
voltage level switching, and external power supply test points. There are controller pins
on evaluation board which describes as below.
Figure1. Top view of WNFB-266AXI(BT) & AP12275_M2 EVB
1-1. Interface Highlights
1.
J
2: 5V DC adaptor input connector
2. J10: PCI-e Half Mini Card Connector (Female) and Latch.
3. J3: UART interface connects with USB port.
4. J4: SDIO Card Connector.
