sparkfun ProtoSnap MiniBot, Инструкция по сборке

Страница: 8 / 16

Locate the silkscreen footprint for the battery holder. Follow the
directions on the next page. Use the illustration below for reference.
Page 7
Battery Holder
16
Congratulations! You’ve successfully soldered the infrared
components. Now use the same method to place and solder
the rest of the components in the kit!
BE CAREFUL, THE FOLLOWING STEPS INVOLVE THE TOP AND BOTTOM SIDE OF THE BOARD.
THIS ARROW INDICATES WORKING ON THE TOP SIDE OF THE BOARD.
THIS ARROW INDICATES WORKING ON THE BOTTOM SIDE OF THE BOARD.
THIS ARROW INDICATES LOOKING AT THE BOARD FROM THE SIDE.