Tools
At a minimum, you’ll need a soldering iron and some solder. You may need
a small screwdriver for attaching the wire to the screw terminals between
the soil moisture sensor and the sensor shield. Our pocket screwdriver and
screwdriver kit both have bits that will work wonderfully for that purpose.
They’re also just handy to keep around!
Suggested Reading
If you have not yet used the ESP32 Thing Development Board, check out
this guide first.
If you aren’t familiar with the following concepts, we recommend checking
Soldering Iron - 30W (US,
110V)
TOL-09507
Solder Lead Free - 15-gram
Tube
TOL-09163
Tool Kit - Screwdriver and
Bit Set
TOL-10865
Pocket Screwdriver Set
TOL-12891
ESP32 Thing Hookup Guide
O CTOBER 27, 2016
An introduction to the ESP32 Thing's hardware features, and a primer on
using the WiFi/Bluetooth system-on-chip in Arduino.
Page 3 of 20
