SPARK TITAN USER MANUAL SF-X8
|
A21
CHANGSHA SPARK TECHNOLOGY ELECTRONICS CO.,LTD
www.sparkfabrica.com
Error Code
Description
Solution
Time Remain
E4
Temp Over Heat
E5
Heat Fail
E6
Tip Over
E7
Sub PCB Unconnected
E8
Shutter Sensor
E9
Illegal Card
Machine Locked
Insufficient time.
Heating protection due to
over-temperature.
Heating process fail.
Tip over alert.
Sub-PCB disconnected.
Shutter sensor malfunction.
Machine locked because of
using illegal or copy RFID card.
Please scan new RFID card.
Stop operating machine until temperature return
to normal.Alert will clear off automatically.
1.Inspect wire connection of heating booster.
2.Replace heating booster
Machine will activate tip over protection if the
angle is more than 45degrees. The alert will
clear off automatically after put the machine
back to normal position.
1. Check wire connection of Sub-PCB.
2. Replace Sub-PCB.
3. Replace main board.
1.Check wire connection of shutter sensor.
2.Check the space between shutter and sensor
(2-8mm is ideal space)
3.Replace shutter sensor.
Use illegal or copy RFID card will lock the
machine. If so ,seller will stop providing
warranty and after sale service. To unlock
the machine,please contact seller.
