Spark Smart Mesh, Быстрый старт

Страница: 10 / 20

2.3 How to make sure your Smart Mesh receives a good signal
9
Plug your Smart Mesh into a power outlet.
Wait for the light on your Smart Mesh to turn
Red
. This may take up to two minutes.
Note:
If you don’t see a light check that the
power button is
ON
.
Press the WPS button at the back of your
new Smart Mesh, the light will start flashing
Orange
.
Return to your previously paired Smart Mesh
and press the WPS button at the back of
your paired Smart Mesh. The light will start
flashing
Blue
.
Wait for the lights on both the Smart Mesh
to turn solid
Blue
, this may take up to two
minutes. If the light on the new mesh turns:
Solid
Red
- Repeat the steps with the new
Smart Mesh closer to the paired Smart Mesh.
Solid
Orange
- Your Smart Mesh is paired,
but is receiving a poor signal. Move the
Smart Mesh closer to the paired Smart Mesh.
A.
B.
C.
D.
E.
Your Smart Mesh units are ready to go!