Parameter setting
Once the LCD screen is turned on, double press the power button (press interval < 0.3
seconds) to switch to parameter setting. Once you have entered into parameter setting,
press up down to navigate through various settings. To select the parameter you would
like to set, press the power button. To exit the parameter setting, double press the
power button
The display will exit the parameter setting back to the home screen if no action is taken
for 10 seconds
The sequence of the parameter is as following:
- Data clean up
The symbol for data clean up is Cr. Use the up/down button to navigate between “y”
indicating yes you want to clean up the data or “n” indicating that you do not want to
clean up the data. Press the power button to select “y” or “n”.
Page 18
