Sparco MAX S2, Руководство пользователя

Страница: 7 / 100

1 : Motor Hall Fault
2 : Motor DC current sample Fault
3 : Motor shunt current sample Fault
4 : Overvoltage Fault
5 : OverCurrent Fault
6 : OverTemp Fault
7 : Undervoltage Fault
8 : Communication Fault
9 : ECU Power on/Power off Fault
10 : Motor No Hall Sensor Fault
ERROR CODE
11 : Motor Hall A Sensor Fault
12 : Motor Hall B Sensor Fault
13 : Motor Hall C Sensor Fault
14 : ECU A shunt High Mosfet short circuit
15 : ECU A shunt High Mosfet circuit cut off
16 : ECU B shunt High Mosfet short circuit
17 : ECU B shunt High Mosfet circuit cut off
18 : ECU C shunt High Mosfet short circuit
19 : ECU C shunt High Mosfet circuit cut off
20 : ECU A shunt current sampling Fault 21 : ECU B shunt current sampling Fault
22 : ECU C shunt current sampling Fault
23 : ECU Bus shunt current sampling Fault
24 : Motor A shunt cable cut off
25 : Motor B shunt cable cut off
26 : Motor C shunt cable cut off
27 : ECU Over Voltage
28 : ECU Under Voltage
29 : ECU Mosfet Over temperature
30 : ECU Mosfet under temperature 31 : ECU Mcu Over temperature
32 : ECU Mcu under temperature
33 : Motor Over temperature
34 : Motor Under temperature
35 : ECU Shunt Over current
36 : ECU Bus Over current
37 : Motor Stall
38 : Speed too High
39 : Accelerator not under control
(Accelerator be press before scooter power on)
40 : Main battery Lock Fault
41 : Stand sitck sensor Fault
42 : Accelerator voltage Low
43 : Accelerator voltage High
44 : Left Brake voltage Low
45 : Left Brake voltage High
7
DASHBOARD OPERATION
LED Lighting: Double-click the power
button to turn on.
Over-temperature Display: If the internal temperature
of the controller and motor is too high during the
operation of the vehicle, the panel will promptly
display an over-temperature alarm.
Failure Alarm: When the controller fails,
the alarm symbol will light up to warn.
Left and right turn signals: the left turn signal
lights up when turning left, and so is the right side.
*All MAX S2 Pro models.
Power display: when the power is more than 85%,
the display is full, and it will gradually go out
as the power drops.
Bluetooth: A solid Bluetooth icon indicates that
the vehicle is connected to a mobile device.
You can view the vehicle status after connecting
to the APP via Bluetooth.
Power Switch
Long press to power on; then the scooter
information will be displayed on the dashboard.
Long press to power off.
Mode Selection
3 driving modes are available,
which respectively are:
- ECO mode (enegry-saving)
- D mode (Standard)
- S mode (Sports).
Single click the power button to switch the mode.
Speedometer
Indicates the current speed.
Also displays error codes when faults are detected.
ESP
AÑOL
IT
ALIANO
FRANÇAIS
DEUTSCH
POR
TUGUÊS
NEDERLANDS
ENGLISH