Spanset HH250150P, Инструкция по установке и эксплуатации

Страница: 10 / 28

10.
INSTALLATION AND OPERATINGMANUAL
SAFETY INSTRUCTIONS
• Before installing and using this unit, in a safe and efficient manner, be sure you have read and fully un-
derstood the information and instructions given in this manual. A copy of this manual should be made
available to every operator. Extra copies of this manual will be supplied on request by SpanSet.
• Do not use the unit if any of the identification plates mounted on the unit are missing or if any of the
information on the plates, in particular the WLL, is missing or illegible. Identical plates will be supplied
by SpanSet on request. The replacement plate must be installed before continuing use of the unit.
• Each time before using the unit, make sure it is visibly in good condition.
• The chain must be in good condition to ensure safe, correct operation of the unit. The condition of the
chain must be checked each time before use as indicated in the “load chain” section.
• Any unit with a chain showing signs of wear should be removed from use and returned to SpanSet for
inspection and repair if necessary.
• Each time before using the unit, check that the low limit stop is in place.
• For professional applications, in particular if the unit is to be operated by an employee, make sure that
you are in compliance with all safety at work regulations governing installation, maintenance and use
of the equipment, and more specifically as concerns the required inspections: verification on commissi-
oning by user, periodic inspections and checks after disassembly or repair.
• To ensure safe use of the unit, it should be visually inspected and serviced regularly. Depending on the
working environment, check for any signs of corrosion or premature wear.
• Make sure that all persons to whom you have entrusted use of this unit are perfectly familiar with
operation of the unit and know all the safety requirements.
• This unit must only be used in full compliance of all safety regulations and standards applicable at the
location of intervention as concerns installation, use, maintenance and inspection of equipment lifting
devices.
• For all professional purposes, the unit must be placed under the responsibility of a person perfectly
familiar with the regulations applicable at the intervention location, and having the authority to enforce
application of the regulations when the person in charge of the unit is not the operator.
• Any person using this unit for the first time must check, under risk-free conditions, that he has perfectly
understood all the safety requirements and methods for efficient use of the unit before applying any
load to this unit. This check can be performed using a test load representing at least 10% of the wor-
king load limit (WLL).
• The unit must only be installed and set into service under conditions ensuring the installer’ safety in
compliance with the regulations applicable to its category.
• SpanSet declines any responsibility for operation of this unit in any mounting configuration other than
that described in this manual in section 3 “Installation”.
EN