SpaNet SHP-100P, Инструкции по установке и обслуживанию

Страница: 19 / 21

16
8. Maintenance and inspection
8.1 Maintenance

Check the water inlet and drainage often. The water and air inflow into the system
should be sufficient so that its performance and reliability does not get compromised.
You should clean the pool filter regularly to avoid damage to the unit caused by clogging
of the filter.

The area around the unit should be spacious and well ventilated. Clean the sides of the
heat pump regularly to maintain good heat exchange and to save energy.

Check if all processes in the unit are operational and pay special attention to the
operation pressure of the refrigerant system.

Check the power supply and cable connections regularly. Should the unit begin to
function abnormally or should you notice a smell from an electrical component, arrange
for timely repair or replacement.

Winterizing : make sure to purge all the water from the heat pump and other systems
in order to prevent frost damage.

You should also purge the water if the unit will not work for an extended period of time.
You should check all parts of the unit thoroughly and completely fill the system with
water before turning it on again afterwards.
8.2 Troubleshooting guide
Improper installation may result in an electrical discharge that could lead to death of
– or
serious injury to -pool users, installers or others due to electrical shock and may also cause
damage to property.
DO NOT attempt to modify the internal configuration of the heat pump.
1. Keep your hands and hair clear of the fan blades to avoid injury.
2. If you are not familiar with your pool filtering system and heat pump:
a. Do not attempt to adjust or service without consulting your dealer or your professional
pool or air conditioning contractor.
b. Read the entire installation and user manual before attempting to use, service or adjust
the unit.
c. Start the heat pump at least 24 hours after its installation in order to prevent
damage to the compressor.
Nota: Switch off the power prior to maintenance or repairs.
19