Spanbilt Fasttrak WorkShop 2010, Руководство по сборке

Страница: 17 / 48

PAGE 17
FRONT WALL PANEL
2
Top and bottom door jamb connection.
Q Q
M M
1
M
M
Notched ends are orientated to the
outer edges of the panel
Overlap the top and bottom channels by 130mm similarly m&m. M&M
Fit the top and bottom channel and door jambs to the wall panels. Ensure
that the positioning of large rib on the sheets are as indicated in the picture.
Also ensure the channel is flush with the edge of the sheets.
It is possible to interchange the orientation of the doors. Make sure the
Outside
Ensure that the small lip
of the channel is to the
outside of the shed.
Wall
Sheet
Channel
Large Rib Small Rib
Large Lip overlaps Small
Lip when fastening sheet
to sheet
C C
C D
M
M
Large Rib
M
M
C
C C
C C
m
M1
D
Large Rib
Large Rib
“D” - Wall Corner Panel “D” - Wall Corner Panel
130
130
15
4 Sheet Gap
3 Sheet Gap
Small Rib
m
m
m
Small Rib
Small Rib
channels also oriented as per the drawing here.
M
M
M
Required to manipulate sheeting panel to align the channel holes