8
ID# M611411
12/05
2.
IMPORTANT!
ONCE POLE SECTIONS ARE POUNDED TOGETHER- THEY CANNOT BE TAKEN APART
THE IDENTIFICATION STICKER IS
LOCATED 3-3/4" FROM THE END
OF THE POLE. WHEN PROPERLY
POUNDED TOGETHER, THE POLE
SECTIONS SHOULD HAVE A 2-1/2"
MINIMUM OVERLAP, LEAVING 1-
1/4" BETWEEN THE OVERLAPPING
POLE AND THE IDENTIFICATION
STICKER.
CAUTION!
5
4
4
5
6
Align poles using
alignment marks.
First, pound top
and middle poles together by bouncing them on a scrap
piece of wood on the ground as shown in
FIG A
. until
they no longer move toward pole identification stickers.
THEN
add bottom pole section and pound together in
the same way
FIG B
.
FIG. A.
FIG. B.
TROUGH
TROUGH
GORGE
RINNE
CANAL
TROUGH
GORGE
RINNE
CANAL
IMPORTANT!
HOLE
DIMPLE
TROUGH
TROUGH
TROUGH
5"
ID
STICKER
1-1/2"
TROUGH
Wood Scrap
(NOT SUPPLIED)
