Spagna Vetro PSD, Руководство по установке и инструкция пользователя

Страница: 20 / 28

Page 18
Specifications
*
:
Body Stainless Steel
Power Rating 220V/50Hz or 120V/60Hz (USA & Canada standard)
General Input Power 190 W (120W + 2x35W)
Motor Input Power 120 W
Motor Revolution 800 RPM (±10%) to 1300 RPM (±10%)
Levels Of Speed Control 4 or 6 Levels
Maximum Airflow 860 CFM
Air Pressure 150 Pa (200 Pa Maximum)
Noise Level (dB / sone) Approximately 35 / 0.7 to 67 / 6.5 (Lowest to Highest Speed)
Motor Type Single Chamber Ultra Quiet
Fan Type Centrifugal / Sirocco
Control Type 4 or 6 Speed Electronic Touch Sensitive
Filtration Type Stainless Steel Baffle Filter
Illumination Halogen 35W or LED 3W Type GU10 120V (220V for Europe)
Venting Size Top, 6 Inches Round
Interference Protection Radio Frequency Interference Protected
Specifications
Use and Care Information
Operations:
Read and understand all instructions and warnings in this manual before operating the appliance. Save these •
instructions for future reference.
Always leave safety grills and filters in place. Without these components, operating blowers could catch on to •
hair, fingers and loose clothing.
NEVER dispose cigarette ashes, ignitable substances, or any foreign objects into blowers. •
NEVER leave cooking unattended. When frying, oil in the pan can easily overheat and catch fire. The risk of •
self combustion is higher when the oil has been used several times.
NEVER cook on “open” flames under the range hood. Check deep-fryers during use: Superheated oil may be •
flammable.
Cleaning:
The saturation of greasy residue in the blower and filters may cause increased inflammability. Keep unit clean •
and free of grease and residue build-up at all times to prevent possible fires.
Filters must be cleaned periodically and free from accumulation of cooking residue (see • cleaning instructions
on Page 19). Old and worn filters must be replaced immediately.
Do not operate blowers when filters are removed. Never disassemble parts to clean without proper instruc- •
tions. Disassembly is recommended to be performed by qualified personnel only. Read and understand all
instructions and warnings in this manual before proceeding.
* Subject to change without notice, please contact your local reseller for details.