Spagna Vetro PS13, Руководство по установке и инструкция пользователя

Страница: 7 / 28

Ceiling
Height
Venting Requirements
Page 5
Height & Clearance
Under Cabinet
Range hood
36”
Counter
Top
Min: 27”
Max: 30”
Vent system must terminate to the outside •
(roof or side wall).
DO NOT terminate the vent system in an at - •
tic or other enclosed area.
DO NOT use 4” (10.2 cm) laundry-type wall •
caps.
Use metal/aluminum vent only. Rigid metal/ •
aluminum vent is recommended.
DO NOT use plastic vent. •
Always keep the duct clean to ensure proper •
airflow.
Calculate the following figures before instal - •
lation:
Distance from the floor to the ceiling. 1.
Distance between the floor to the coun- 2.
tertop/stove (recommend* 27” to 30”).
Distance between the countertop/stove 3.
to the range hood.
Height of hood and duct cover. 4.
For the most efficient & quiet operation:
A distance of 27” to 30” is recommended* •
between stove top and the bottom of range
hood.
It is recommended that the range hood be •
vented vertically through the roof through 8”
(20.3 cm) or bigger round metal/aluminum
vent work.
The size of the vent should be uniform. •
Use no more than three 90° elbows. •
Make sure there is a minimum of 24” (61 •
cm) of straight vent between the elbows if
more than one elbow is used.
DO NOT install two elbows together. •
The length of vent system and number of •
elbows should be kept to a minimum to pro -
vide efficient performance.
The vent system must have a damper. If •
roof or wall cap has a damper, DO NOT
use damper (if supplied) on top of the range
hood.
Use silver tape or duct tape to seal all joints •
in the vent system.
Use caulking to seal exterior wall or roof •
opening around the cap.
* Due to different ceiling height configurations, rec -
ommended height may not be applicable.
Cabinet
Range
Hood
Height
Cabinet
Height
Countertop/Stove