SpaDealers Polar AquaKing, Руководство пользователя

Страница: 5 / 11

Picture 2 show how the air pump for the bubble system is placed.
It should not be oriented with the air exhaust upwards.
If the AquaKing is equipped with the BactiSafe (accessory) then it is positioned according to picture 1.
The control system is fastened in the position that is shown in picture 2.
Connect the nut to pump and filter properly (picture 3)
When installing the insulated box insulating foam (polyurethane) will be applied between the side insulation
of the spa bath and the boxe's insulation, see picture. The insulation beneath the lid of the box should not be
used when the temeprature indicates more than + 10 degrees. To protect BactiSafe against damage from
freezing it should be drained by loosening the stainless nut and the sealing around the glass tube.
Lowering into terrace
ATTENTION! If the hot tub will be countersunk e.g. in a terrace it is necessary
that the access is not obstructed in any way order to be able to service it. Service hatch and outer panel should
be removable without difficulties.
1
2
3 4