HD Digital Signal Meter Spacetronik STC-33 Combo – User manual
15 / 23
6.
DVB-T/T2
User can measure the live DVB-T/T2 signal, analyze the
spectrum, the scope between transponders , auto scan all
the saved frequencies and list all the locked ones. There
are six submenus: Measure, Auto Scan, RF Channel List ,
Scope, Spectrum chart and ANT power.
6.
1
T
ERRESTRIAL
M
EASURE
The device will show SNR, CBER, VBER, power value,
strength and quality of the connected live signal. Please see
below for detail.
:
The lock status. The signal is locking if the icon is green otherwise the
color of the icon is red.
C12:
The channel name.
5V, 12V,18V: The antenna output voltage. The color of icon will be green once the voltage
is outputting or the color is gray.
DVB T2:
The terrestrial system. The values are DVB T and DVB T2. Press [
/
]
to switch them.
FREQ:
The current frequency. Press [
/
] to change the frequency or [OK]
to edit it.
BW:
The bandwidth of the live signal. Press [
/
] to switch between 6M,
7M and 8M.
SNR:
The signal noise rate value of the live signal.
CBER:
The CBER(BER before FEC) value of the live signal.
LBER:
The LBER(BER after LDPC) value of the live signal.
LEVEL:
The power level value of the live signal.
Str:
The strength of the live signal in percent.
Qlt:
The quality of the live signal in percent.
