HD Digital Signal Meter Spacetronik STC-33 Combo – User manual
10 / 23
5.3
E
DIT
S
ATELLITE
The parameters of satellite, such as Orbit Position and
Transponder can be edit in this menu. All the satellites will
be listed in this menu.
Press [
/
] buttons to move curse in list.
Press [F2] button to edit the name or the orbit position of
current satellite in the dialog. And then press [
/
] to
move curse and [
/
] to change value of each focused
item in edit menu.
Press [F3] to add new satellite. Press [F4] to enter delete
satellite dialog, and then press [OK] to confirm to delete or
press [MENU] to cancel.
Press [OK] to enter transponder list of current satellite.
On transponder list menu, press [OK] or [F2] to edit
transponder. Press [F3] to add new transponder. Press [F4]
to enter delete dialog, press [OK] to confirm to delete or
press [MENU] to cancel. And press [OK] button to edit
selected transponder. And then press [
/
] to move
curse and [
/
] to change value of each focused item in edit menu.
5.4.
S
PECTRUM
C
HART
This menu will show the spectrum chart of setting
frequency range on current cable line. Press [
/
] to
switch curser focus between Start Frequency, LNB Type,
End Frequency, LNB Power/22K and Current Frequency
Mark.
22K:
Show the 22k status. -–K: 22k off; 22k: 22k on
13V:
Show the RF power output status. The values are: 13V, 18V and OFF(--V)
