Spacelabs qube 91390, Руководство по обслуживанию

Страница: 87 / 160

www.spacelabshealthcare.com 4 - 3 3
9 1 3 9 0
Q U B E
M
A I N T E N A N C E
Figure 4-30 Latch Docking Station
7 Remove the six (6) connector standoff screws from the back of
the docking station with a nut driver. Refer to
Figure 4-31 .
Figure 4-31 Docking Station Connectors
8 Turn the docking station back over. Carefully slide out the
docking station PCBA. Do not damage the connectors.
9 Install a new docking station PCBA in the reverse order.
10 Perform functional tests in accordance with the monitor
functional tests. Refer to
Figure 4-30 .
Replace the Docking Station Latch
1 Disconnect all cables from the docking station.
2 Turn the docking station over. Remove the six screws from the
docking station cover plate. Refer to
Figure 4-27 on page 4-31.
3 Remove the docking station cover plate. Set it aside.
4 Remove the connection J70 (LED wiring assembly) from the
docking station PCBA. Refer to
Figure 4-32 .