SPACECAM
SYSTEMS, INC.
MAXIMUS 7 OPERATOR’S MANUAL
August 17, 2016
6 MAINTENANCE TOOL
The Maintenance Tool is a PC software that can be used to monitor and change some of the internal
parameters of the Gimbal Controller’s parameters. The Maintenance is to be used with caution, these
parameters effect the response and stability behavior of the system. Incorrect parameters literally can
disassemble your gimbal causing wild and powerful movements!
6.1 Installing the Maintenance Tool
Acquire the Maintenance Tool Setup program from spacecam. Copy it to a folder you will remember on
your computer. When ready double click the program.
Read the License Agreement and accept it.
Select the shortcuts you want to create. (Definitely need the desktop shortcut.)
Click Install.
If this is the first time you install on this computer you may want to check :
“Install Gimbal’s USB Driver”
Click Finish.
6.2 Uninstalling the Maintenance Tool
Delete directory c:\spacecam\maximus.
Delete the existing desktop icons.
6.3 The content of the Maintenance Tool’s installation directory
The directory is “
c:\spacecam\maximus
”.
MaximusMaintenance_vx.xx.exe
The executable of the Maintenance Tool
DSPFlash.bat
A batch file to boot-load (flash) the Gimbal Controller.
sfh_OMAP-L138.exe
TI licensed boot-loader used by DSPFlash.bat.
teraterm-4.89.exe
A terminal program installer, may be needed for the
boot-loader procedure.
CDM v2.12.00 WHQL Certified.exe
Gimbal Controller’s USB driver installer.
31240 La Baya Dr. Ste. A
Westlake Village, CA. 91362
818-889-6060
Page 57 of 74
