SPACECAM
SYSTEMS, INC.
MAXIMUS 7 OPERATOR’S MANUAL
August 17, 2016
3.2.4 Option-1’s.
To change options, press MENU and select (¶
) “Options”.
These parameters reside on the gimbal controller therefore can not be displayed or adjusted if the
communication to the gimbal is broken.
RollStick Spd
To change the maximum Speed of the roll in position mode.
RollStick Tpr
To change the taper range of the roll in position mode. See explanation of taper range
on page
.
Yaw follow
To change the yaw follow mode filter (follow dynamics), the larger the number
the slower the response.
Pitch follow
To change the pitch follow mode filter (follow dynamics), the larger the number
the slower the response.
Roll follow
To change the roll follow mode filter (follow dynamics), the larger the number the
slower the response.
Encoder scale
To change the pre-scale of the wheel and pan-bar encoders. Range is from 1 to 16. Use
1 or 2 for wheels and 16 for Cartoni pan-bar.
31240 La Baya Dr. Ste. A
Westlake Village, CA. 91362
818-889-6060
Page 20 of 74
