3
Install driver in ‘Windows 98/ ME and Windows 2000’
If your computer uses USB port first time, it requires new hardware
information. When a message pops up saying it needs Windows CD for an
update, insert Window Installation CD that comes with your computer
when it was purchased. Then start installing Windows CD, according to the
instruction displayed on your computer. After the installation, check for
‘HID-compatible mouse’ from the mouse icon in the control panel. ‘HID-
compatible mouse’ indicates that USB port is activated. Keep ‘Wireless
Mouse Spaceball Installation CD’ handy for installation.
First, hook up Spaceball receiver to USB port.
Insert “Wireless Mouse Spaceball Installation CD” in the CD-ROM
drive. (Upon inserting, the program starts installing itself through
Autorun function.)
Choose between ‘Windows98/ME driver installer’ and ‘Windows 2000
driver installer’ button from the menu bar on the right side of installation
window, depending on your operating system and then click.
Read the explanation on the window, while proceeding the installation.
Reboot your system, when installation is complete.
(After Install finish, you must restart PC)
Once the installation is normally completed, “Spaceball” icon similar to a
dot & battery should be on the left side of the task bar and starting
menu.
HOW TO INSTALL SPACEBALL PROGRAM
Our program CD put on CD driver.
It will start auto-run, you can see Install panel on
monitor
You could click ‘DRIVER SETUP’ and progress
Install
NOTE
- First, check the operating system of your computer
(i.e. \windows 98/ ME/ 2000)
- If your computer uses a USB port first time, it will require hardware information,
when the spaceball receiver connect to USB port to make computer accept
USB port, get the
‘WINDOWS Installation CD’
that came with your computer
ready to activate USB port and then install Spaceball program.
