Instruction manual
SPACE s.r.l.
ARS680WS - ARS680 WD - ARS660WD
Code M0203 - rev.1.0
(11/2010)
Page 46/52
SPACE s.r.l. a s.u. -
Via Sangano, n° 48 - 10090 Trana (Torino - Italy)
Tel. (+39) 011/934.40.300 – Fax . (+39) 011/933.88.64
e-mail: [email protected]
DETECTOR
KEYPAD
PC KEYBOARD
DESCRIPTION
It goes back to the
introduction page.
(see chap. 8 on page 19)
It moves selection up.
It moves selection down.
As you can see from the zoom on the right side of Figure 64, you will have to specify if the point
datum refers to can be adjusted or not.
The point to which the data
refer can be adjusted. To
define it as not-adjustable,
press:
The point to which the data
refer cannot be adjusted. To
define it as adjustable, press:
Once the desired option has
been selected, press:
Once angle “adjustability” has been specified, you can enter the
graphic animations.
Select the correct image or animation with keys
,
then press “Enter” to confirm
Now you shall enter vehicle standard tolerance values as for:
FRONT AXLE:
•
Toe
•
Camber
•
Caster
•
Kingpin
•
Included angle
•
Max. steering
REAR AXLE
•
Toe
•
Camber
•
Thrust angle
Select data as described above, and enter values.
Warning: To separate whole values from decimals, try using a “dot”
or a “comma”
.
