5
3.3. USAGE:
It is always necessary to make sure that the installation of the heater is properly made and the electricity current
provided is not below or above permissible the limits. Products which are installed correctly should serve you for a
long time. Please pay attention to the following when using this heater.
Please check if the heater is installed properly according to the rules (descriptions and warnings) given in the
instruction manual.
When using models supplied with a plug, just connect the plug to a wall terminal with convenient grounding.
Turn on the on/off switch when using un-plugged models.
Disconnect the electric supply if the heater is not used.
Fluctuations in the electric voltage will reduce the lamp life. Please make sure that the fluctuations do not
occur.
Each heater has protective wire guard at the front to prevent anything to reach the heating elements (lamp,
cables, etc.). Do not operate the heater when the protective guard is uninstalled.
Do not put anything within the heater and do not touch the lamp.
Stay 1,25 m away from the heater when it is on.
Prolonged looking at the lamp during operation may result in damage to the eye. Therefore when the heater
is on, do not look at the lamp with bare eyes.
Protect the heater against shocks and vibrations even when it is not operating.
Do not put anything on the heater or cover it fully or partially.
Be sure that, things that combustible items such as paper, nylon curtains etc.. are at least 1,25 m away from
the heater.
Be sure that children cannot reach the heater.
If the heater is not working:
o
Do not try to fix the heater.
o
Disconnect the electric supply.
o
Contact the nearest authorized agent for maintenance.
The reflectors are made out of highly polished aluminum. They do not lose their reflectivity easily, even
because of the dirt and dust. Therefore, it is not necessary to clean them frequently. However, if needed
please follow the procedure below to clean the reflectors.
o
Disconnect the electric supply of the heater.
o
Remove the protective guard.
o
Clean the reflector with a dry cloth.