3
3. INSTRUCTIONS FOR INSTALLATION AND USAGE:
3.1. IMPORTANT SAFETY INFORMATION:
Please read this information carefully before installing and using this device, which is manufactured to use
for general, local and spot heating.
This device should not be used in the environments where;
o
there are flying or jumping animals,
o
explosive or flammable goods are manufactured or stored,
Do not touch the lamp(s) with bare hands. If you touch the lamp(s) somehow, try to clean the fingerprints
with a soft and dry cloth and with the help of volatile Solvent such as alcohol. Otherwise, these fingerprints
would cause to lessen the life of the lamp(s).
In 1 lamp models (GSS15,GSS20) the electrical connection should be made by authorized personnel
according to the instructions and the wiring diagram on page 4.
In 2 lamp models (GSS30,GSS40), the electrical connection should be made by authorized personnel
according to the instructions and the wiring diagram on page 4.
It is not necessary to
de-assemble
of any part of the device to make the electrical connection. The
connection should only be made according to the instructions and schematics given below.
Please have your electricity infrastructure (capacity, earth, protection) checked carefully by authorized
personnel if it is appropriate to use this device before installing it. The manufacturer is not responsible any
damage that may be caused because of the installation or usage of this product other than described within
this manual.
The below table showing the minimum heights from the floor level for installing the products should be taken
in the consideration:
Model
Volt
Power Current
Min. Height
Dimensions
(V)
(W)
(A)
From Floor (m) (mm)
GSS15
220/240
1500
6,25
2,10
430x166x95
GSS20
220/240
2000
8,25
2,50
430x166x95
GSS30
220/240
3000
12,50
3,50
830x166x95
GSS40
220/240
4000
17,40
3,50
830x166x95