Space-Ray RFPA21A-L6 Скачать руководство пользователя страница 12

41357080 

July 06 

 

11 

 

 
 
 
LIMITED WARRANTY:

  Gas-Fired Products, Inc., the manufacturer, warrants to the original owner of any Space-Ray infrared gas heater 

that said heater will be free from defects in material or workmanship under normal use and service.  The heater(s) shall be installed, 
used and maintained strictly in accordance with the manufacturer's instructions.  The manufacturer's sole obligation under this 
warranty shall be limited to furnishing replacement parts, F.O.B. Charlotte, NC, for 12 months from the date of installation, or 18 
months from the date of shipment by the manufacturer, whichever period shall expire first.  Labor charges for removal of defective 
parts and the installation of the replacement parts are not included.  This warranty applies only within the USA and Canada. 
 

WARNING

:  Manufacturer's warranty shall not apply:  (a) to damage to the heater when used in an atmosphere containing halogenated 

hydrocarbons or other corrosive chemicals.  Some compounds in the air can be ingested into the equipment and can cause an 
accelerated rate of corrosion of some of the parts of the heating components.  The use of such chemical compounds in or near the 
operating environment of the heater should be avoided where a longer heater life is desirable;  (b) to any heater or components which 
have been repaired or replaced with other than factory parts, modified in any way, misused or damaged, or which have been used 
contrary to the manufacturer's written instructions.  Replacement parts are available through Space-Ray representatives or their 
distributors. 

 
LIMITATION OF WARRANTY

:  THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE DESCRIPTION ON THE 

FACE HEREOF.  WITHOUT LIMITING THE FOREGOING, THE MANUFACTURER EXPRESSLY EXCLUDES ANY AND ALL IMPLIED WARRANTIES, 
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND ANY IMPLIED WARRANTY 
OF MERCHANTABILITY FOR ITS PRODUCTS. 
 
If any provision of this warranty is found to be void, unenforceable or unconscionable, then the same is hereby severed and the 
remainder of this warranty is hereby saved and shall remain in force. 
 

EXCLUSIVE REMEDY:

  The sole and exclusive remedy under this warranty is the replacement of the defective parts or heaters as 

hereinabove specified.  THE MANUFACTURER DOES HEREBY EXPRESSLY EXCLUDE ANY AND ALL LIABILITY FOR INCIDENTAL AND 
CONSEQUENTIAL DAMAGES UNDER THIS OR ANY OTHER WARRANTY.  Without intending to limit the aforesaid exclusion, THE 
MANUFACTURER DOES HEREBY EXCLUDE ANY LIABILITY UNDER THIS OR ANY OTHER WARRANTY FOR INJURIES AND COMMERCIAL 
LOSSES TO PROPERTY THAT RESULT FROM THE OPERATION, PROPER OR IMPROPER, OF ITS PRODUCTS. 
 

ADDITIONAL WARRANTY ON HEAT EMITTING SURFACE AND BURNER:

  Manufacturer warrants to the original owner of any CSA design 

certified heater that, if installed, used and maintained strictly in accordance with the printed instructions received with the heater, the 
manufacturer will at any time during the below listed time periods, furnish at no cost to the original owner, replacement emitters or 
burners which have become inoperative by reason of any defect in our workmanship, materials or construction. The manufacturer's 
obligation under this warranty shall be limited to furnishing replacements under the following time periods from the date of installation: 
 

 EMITTER BURNER 
RFPA SERIES 

1 Year 

10 Years 

 
The manufacturer will not be responsible for labor charges incurred for removal or installation of emitters.  Any transportation charges 
involved in the return or repair are excluded. 
 

ADDITIONAL TERMS:

  Manufacturer assumes no liability for delay in performing its obligations under the aforesaid warranty. 

Manufacturer assumes no liability for failure in performing its obligations thereunder if failure results directly or indirectly from any 
cause beyond its control, including but not limited to acts of God, acts of Government, floods, fires, shortages of materials, strikes and 
other labor difficulties or delays or failures of transportation facilities. 
 

THIS IS A NON-RESIDENTIAL PRODUCT.

  Installation and service shall be by a Licensed Contractor and in accordance with National and 

Local Codes. 
 
When presenting warranty claims, proof of date of purchase must be submitted. 
 
No Representative is authorized to assume for the manufacturer any liability except as set forth above. 
In case of claim under this warranty, contact: 
Space-Ray 
P.O. Box 36485 
305 Doggett Street (28203) 
Charlotte, NC  28236 
(704) 372-3485 

Содержание RFPA21A-L6













Отзывы: