Form #43343530
Mar 09
-25-
12.1)
CONNECTING THE TISS SYSTEM
Description: The TISS (Tube Integrity Safety System) is designed to shut the main burner off in the event that a
burnout occurs in the first 10ft. section of firing tube. Note: When replacing the firing tube a new TISS wire
assembly PN 44176010 (spring and spring retainer clamp not included) must also be installed.
Instructions:
1.
Make sure that the gap between the burner box and end of reflector is 3” and the reflector is securely
attached to the reflector support bracket. Make adjustments if necessary.
3 Gap (between
burner box and end
of reflector)
#10 x 1/2 Screws
must securely attach
reflector to the bracket
TISS Assembly.
Step 1
2.
Un-roll the TISS wire assembly from the spool. Be careful not to kink the wires.
Spool with
TISS Wire
Assembly
Step 2
