Space-Ray CB20-L5, Инструкция по установке и эксплуатации

Страница: 7 / 40

Form 43471000
-6- Sept 2011
6.1) ACCESSORY PACKAGES
A. A. A. A. Exhaust Hood Package, Part Exhaust Hood Package, Part Exhaust Hood Package, Part Exhaust Hood Package, Part #42924000 #42924000 #42924000 #42924000
Contains:
Exhaust Hood Assembly, #42925540……QTY–1
#8-18 x ½ Self-Drilling Screws, #02189030……QTY–2
4” (10cm)
7 1/2”
(19cm)
3 3/4” (10cm)
3 1/2” (9cm)
6”
(15cm)
Bird
Screen
Side View
Front View
B. B. B. B. Lower Mounting Kit, Part #43515000 Lower Mounting Kit, Part #43515000 Lower Mounting Kit, Part #43515000 Lower Mounting Kit, Part #43515000
The Lower Mounting Kit is required when the heater
is installed at mounting heights between 6 ft. and 8
ft. above a finished floor.
Contains:
Emitter Guard Kit, #43485000……QTY–1
(The Emitter Guard Kit includes an aluminum
decorative grille with side emitter guard holder panels.
This item and the Draft Inducer Guard Kit make up the
Lower Mounting Kit, which must be used in
installations with mounting heights between 6 ft. and
8 ft. This item could be used separately in
installations above 8 ft., however, for decorative
purposes if desired.)
Draft Inducer Guard Kit, #43486000……QTY–1
(The Draft Inducer Guard Kit is an aluminum shield
mounted around the draft inducer (brackets and
screws included). This item and the Emitter Guard Kit
make up the Lower Mounting Kit, which must be used
in installations with mounting heights between 6 ft.
and 8 ft.)
C. C. C. C. D D D Deflector Kit, Part #43504000 eflector Kit, Part #43504000 eflector Kit, Part #43504000 eflector Kit, Part #43504000
The Deflector Kit is available for use to reduce the
clearances to combustibles below the heater. Refer
to the Minimum Clearances to Combustibles Table
Minimum Clearances to Combustibles Table Minimum Clearances to Combustibles Table
Minimum Clearances to Combustibles Table in
Section 4.0) when using this Deflector Kit. Heater
Heater Heater
Heater
must be mounted
must be mounted must be mounted
must be mounted ONLY
ONLY ONLY
ONLY in the horizontal position
in the horizontal position in the horizontal position
in the horizontal position
when using this kit. when using this kit. when using this kit. when using this kit.
Deflector
Deflector
Bracket
Hanger Bracket
(tube & reflector
components not
shown)
Deflector
10 1/2”
(267mm)
5 1/2”
(140mm)