Space Pak CSOLSTICE SIM-036 Скачать руководство пользователя страница 58

– 58 –

SIM Inverter Monobloc Air-to-Water Heat Pump

SpacePak Buffer Tanks

 

The “Manufacturer” warrants to the original owner at the original installation site that the Hydronic Buffer Tanks 

(the “Product”) will be free from defects in material or workmanship for a period not to exceed ten (10) years from 

the startup, provided the product is installed in accordance with the manufacturers installation instructions. If 

upon examination by the Manufacturer the Product is shown to have a defect in material or workmanship during 

the warranty period, the Manufacturer will repair or replace, at its option, that part of the Product which is shown 

to be defective.

The following items apply to each Limited Warranty offered by SpacePak.

4)  NO LABOR. Each Limited Warranty offered by SpacePak does NOT include labor or any other costs incurred 

for service, maintenance, repair, removing, replacing, installing, complying with local building and electric codes, 

shipping or handling, or replacement of the System/Products, compressors or any other parts. For items that are 

designed to be maintained or replaced by the original owner, the original owner is solely responsible for all labor 

and other costs of maintaining, installing, replacing, disconnecting or dismantling the System/ Products and 

parts in connection with owner-required maintenance. Please consult the applicable technical documentation 

for regularly suggested maintenance procedures.

5)  PROPER INSTALLATION. This Limited Warranty applies only to Systems/Products that are sold by SpacePak 

HVAC representatives, installed by contractors who are licensed for HVAC installation under applicable local 

and state law, and who install the Systems/Products in accordance with (i) all applicable building codes and 

permits: (ii) SpacePak’s installation and operation instructions: and (iii) good trade practices.

6)  BEFORE REQUESTING SERVICE, please review the applicable technical documentation to insure proper 

installation and correct customer control adjustment for the System/Products. If the problem persists, please 

arrange for warranty service.

a.  

TO OBTAIN WARRANTY SERVICE:

i.  Contact the licensed contractor who installed the System/Products or the nearest licensed contractor, 

dealer, or distributor (whose name and address may be obtained on our website at www.SpacePak.

com of any defect within the applicable warranty time period.

ii.  Proof of the installation date by a licensed contractor is required when requesting warranty service. 

Present the sales receipt, building permit or other document which establishes proof and date of 

installation. In the absence of acceptable proof, this Limited Warranty shall be deemed to begin one 

hundred twenty (120) days after the date of manufacture stamped on the System/Products.

iii.  This Limited Warranty applies only to System/Products purchased on or after February 1, 2021 only 

while the System/Products remains at the site of the original installation, and only to locations within 

the continental United States, Alaska, Hawaii and Canada.

iv.  Shipment, to the Manufacturer, of that part of the Product thought to be defective. Goods can only 

be returned with prior written approval from the Manufacturer. All returns must be freight prepaid. 

Determination, in the reasonable opinion of the Manufacturer, that there exists a defect in material 

or workmanship.

b.  THIS LIMITED WARRANTY DOES NOT COVER: property damages, malfunction or failure of the System/

Products, or personal injury caused by or resulting from: (a) accident, abuse, negligence or misuse; (b) 

operating the System/Products in a corrosive or wet environment, including those containing chlorine, 

fluorine or any other hazardous or harmful chemicals or environmental factors, including sea- or salt-water; (c) 

installation, alteration, repair or service by anyone other than a licensed contractor or other than pursuant to 

the manufacturer’s instructions; (d) improper matching of System/Products components; (e) improper sizing 

of the System/Products; (f) improper or deferred maintenance contrary to the manufacturer’s instructions; 

(g) physical abuse to or misuse of the System/Products (including failure to perform any maintenance as 

described in the Operation manual, or any System/ Products damaged by excessive physical or electrical 

stress; (h) System/Productss that have had a serial number or any part thereof altered, defaced or removed; 

(i) System/Products used in any manner contrary to the Operation Manual; (j) freight damage; or (k) events 

of force majeure or damage caused by other external factors such as lightning, power surges, fluctuations 

in or interruptions of electrical power, rodents, vermin, insects, or other animal- or pest-related issues.

c.  THIS LIMITED WARRANTY ALSO EXCLUDES: (a) SERVICE CALLS WHERE NO DEFECT IN THE 

SYSTEM/PRODUCTS COVERED UNDER THIS WARRANTY IS FOUND: (b) System/Products installation 

or set-ups; (c) Adjustments of user controls; (d) System/Products purchased or installed outside the 

continental United States, Alaska, Hawaii and Canada; or (e) System/Products purchased or installed prior 

to February 1, 2021. Consult the operating instructions for information regarding user controls.

Содержание CSOLSTICE SIM-036





























































Отзывы: