HELPLINE 0861 40 41 42 • www.spacetv.co.za
MOD-HDMI-Q : Operation Manual 1v0
Eg. Let’s say we want to install three modulators in a CATV network. In step No 4 we will
choose:
• Profile
No 1
for the
1st
modulator
o
meaning: Program Name = DTV
1
o
meaning: Service ID =
1
o
meaning: TS ID = 224
0
• Profile
No 2
for the
2nd
modulator
o
meaning: Program Name = DTV
2
o
meaning: Service ID =
2
o
meaning: TS ID = 224
1
• Profile
No 3
for the
3rd
modulator
o
meaning: Program Name = DTV
3
o
meaning: Service ID =
3
o
meaning: TS ID = 224
2
As a result, all the above modulators have different values in the above fields.
Caution!!!
• Every time we choose a different Profile number, the MOD-HDMI-Q will apply a full
reset to itself that will last for 40-50 seconds.
• Using the USB interface, we have the ability to add custom values to the above fields.
3.3.2 Installation using the USB interface:
The MOD-HDMI-Q provides a USB interface with the appropriate software for advanced
programming.
System requirements
• Windows XP (SP1 or higher)
• Windows Vista
• Windows 7 (32 & 64bit)
• Windows 8 (32 & 64bit)
• Windows 10 (32 & 64bit)
Device connection via software
1. Download the appropriate software from www.spacetv.co.za and run it.
2. Connect the MOD-HDMI-Q via the USB cable (A-male to B-male type) and wait
until the drivers are installed.
3. In case Windows cannot install the USB drivers automatically, when prompt,
insert the correct path of the folder named “USB drivers”, which contains the
MOD-HDMI-Q USB drivers.
4. Once Windows have successfully installed the USB drivers of the MOD-HDMI-Q, a
pop-up message appears to verify this process.
5. Run the Lemco GUI xxx.exe file and the main screen will appear (Figure No 2):
